Analysis of the incorrect operation of the wire rope rig
1. Before using the complete steel wire rope, hang the steel wire rope directly into the force center position of the hook, and do not hang it on the hook tip;
2. Before using the two steel wire ropes, hang the two steel wire ropes directly into the double hooks, and each of the two steel wire ropes should be hung in the symmetrical center of the double hooks. When the four steel wire ropes are used, every two steel wire ropes When the hook is directly hooked into the double hook, pay attention that the two steel wire ropes in the hook cannot overlap and squeeze each other, and the four wire ropes must be symmetrical to the force center of the hook;
3. When lifting the complete rigging, avoid lifting angles exceeding 60 °;
4. It is strictly forbidden to knot the steel wire ropes, and direct contact between the steel wire ropes is prohibited, and shackles or rings shall be used to separate them.
It is necessary to understand and strictly implement standardized operations, and some of the operation taboos mentioned above should also be avoided as much as possible, which will play a significant role in improving the safety and reliability of the equipment itself and the operating process, as well as work efficiency.
- [Yunfan Rigging] Have you used the correct method of shackle?
- [Yunfan rigging] Facts about the sling industry
- [Yunfan rigging] Factors affecting the normal use of wire rope chucks
- [Yunfan rigging] Several elements of maintenance
- National Day69th Anniversary of the Founding of the People's Republic of China
- Mid-autumn moon is a painting, moon is a poem
- [云帆 Rigging] Introduction of forging categories
- [Yunfan rigging] Factors affecting the use of wire rope chucks
- [Yunfan rigging] Attention issues during hook take-off and landing
- [Yunfan Rigging] Requirements for using slings