⎝⎛天天电玩城⎞⎠

Hello, welcome to Qingdao Yunfan Rigging Co., Ltd.!

Message | Collection Yunfan | Site Map

云帆索具

· PICC承保· ISO 9001:2015国际质量体系认证· SGS认证工厂 Yunfan · Rigging Supplier of Rigging Industry Brand Rigging Supplier · PICC Underwriting · ISO 9001: 2015 International Quality System Certification · SGS Certified Factory
National Consulting Hotline 4006-532-558

Keywords: rings manufacturer shackle rigging factory chain rigging rigging

钢丝绳索具
Recommended Products
Contact Yunfan
National consultation hotline: 4006-532-558

Phone: 0532-87696898

Fax: 0532-87759096

QQ: 2246672400

Email: yang@qdsailrigging.com

Address: No. 6 Changcheng South Road, Chengyang District, Qingdao, Shandong Province

01-10 2018 01-10
Three or nine days

No one shot in nineteen twenty-nine, three nine four nine went on ice

12-03 2017 12-03
Maintenance knowledge of lifting equipment hooks

As a more common type of lifting equipment for lifting equipment, the importance of daily maintenance is not to be underestimated. Hidden safety hazards are eliminated, and maintenance is the most essential.

11-23 2017 11-23
Qingdao Yunfan, always grateful

Qingdao Yunfan, thanks for having you!

11-11 2017 11-11
Understanding wire rope chucks

Wire rope chucks are also known as wire rope clamps, wire rope clamps, wire reels, clamps, wire clamps, and wire rope rolling heads. They are mainly used for temporary connection of wire ropes and fixing of wire ropes.

11-03 2017 11-03
Selection of shackles and scrap standards

Generally, the size of the shackle is very small, but it has a large bearing weight and a wide range of uses, especially in the power, metallurgy, petroleum, machinery, railway, chemical, port, mining, construction and other industries.

10-27 2017 10-27
Nine Nine Ninth Festival

It is another September 9th of the year. Traveling to enjoy autumn, to look up from afar, to watch chrysanthemums, to insert dogwood, to eat Chongyang cake, and to drink chrysanthemum wine are all activities for the Chongyang Festival.

10-18 2017 10-18
19th National Congress of Dry Goods

The opening meeting of the 19th National Congress of the Communist Party of China was held at 9 am in the Great Hall of the People today, and Xi Jinping made a report to the 19th National Congress of the CPC on behalf of the 18th Central Committee. This is a very important conference convened in the critical period of building a well-off society in an all-round way, and the crucial period when socialism with Chinese characteristics entered a new era. The theme of the conference is not to forget the original intention, to keep in mind the mission, to hold high the great banner of socialism with Chinese characteristics, to build a well-off society in an all-round way, to win the great victory of socialism with Chinese characteristics in the new era, and to work tirelessly to realize the Chinese dream of the great rejuvenation of the Chinese nation.

10-12 2017 10-12
The use of hook specifications

What is the safety inspection method when using a hook? To what extent should the hooks be scrapped? What is the criteria for scrapping them? Qingdao Yunfan Rigging will show you

09-30 2017 09-30
Celebrate National Day and welcome Mid-Autumn Festival

The National Day is here, bringing his brother Mid-Autumn Festival

09-27 2017 09-27
Matters needing attention when using horseshoe shackles

Horseshoe shackles are widely used in hoisting, traction and other industries. Shackles are widely used because of their small size and large carrying weight. Attention should be paid to some issues when using

09-22 2017 09-22
Why Chinese manufacturing and international brands in the rigging industry still differ

In the Chinese rigging market, European and American companies have coexisted with domestic private enterprises, and high, medium and low manufacturers have coexisted. In recent years, China's rigging has developed rapidly and the export situation is quite promising. The industry has developed late and there is a certain gap with foreign rigging companies

09-22 2017 09-22
How to prevent rigging breaks

Not only are the riggings of a wide variety, the use environment is complex, and the quality of the personnel is uneven, which makes the process of lifting a lot of dangerous factors. From the perspective of safety management, Yunfan believes that the reasonable prevention of rigging breakage should start from these three aspects

02-11 2017 02-11
Use method and standard of wire rope chuck

This article introduces the use method and precautions of wire rope chucks——Qingdao Yunfan | Yunfan Rigging | Rigging | Qingdao Rigging | Rigging Factory | Forging Manufacturers | Cast Manufacturers | Stainless Steel Products | Shackles | Flower Lan | Card Head | Flower Basket | Cargo Hook | Tight Rigging | Looping | Wire Rope | Lifting Ring |

12-09 2016 12-09
Shackle Conventional Scrap Standard

(1) There is obvious permanent deformation, or the pivot pin is not flexible. (2) The amount of wear on the cross section of the buckle body and shaft pin is more than 10% of the original size. (3) A crack appears in the shackle, or it cannot be locked, or the test result is unsatisfactory.

05-09 2016 05-09
Lifting precautions for double eyebolts

As a type of lifting sling, eye bolts are not unfamiliar to everyone and are often used in some lifting operations in life. In order to perform the lifting operation more stably, the use of eyebolts is often larger than one. The following Yunfan rigging will tell you about the precautions for lifting double eyebolts. 1. When lifting the double eyebolts, make sure that the two eyebolts are in the same plane. If necessary, adjust shims can be placed on the support surface. 2. The maximum lifting weight of the double eyebolts is only suitable for installing the eyebolts on steel In the case of gray or cast iron parts, overloading is strictly prohibited; 3. When the double eyebolts are lifted, the eyebolts should be of the same type and specification; 4. When the double eyebolts are lifted, the angle of the steel cable should not be greater than 90 degrees; Eyebolts must be screwed in until

05-04 2016 05-04
Dacromet for surface treatment of rigging products

Some customers have always asked before, what is Dacromet treatment? What is the difference between galvanized and plastic spray treatment? Next, Yunfan Rigging will introduce the Dacromet treatment in detail for everyone. 1. Super corrosion resistance: Dacromet film thickness is only 4-8μm, but its antirust effect is 7-10 times more than galvanized and spray-treated. The rigging products treated with Dacromet did not show red rust for more than 1200 hours after the salt spray test. 2. Hydrogen-free embrittlement: Dacromet's treatment process determines that Dacromet has no hydrogen embrittlement, so Dacromet is very suitable for coating of rigging products. 3. High heat resistance: Dacromet can withstand high-temperature corrosion, and the heat-resistant temperature can reach above 300 ℃. And traditional plating

04-28 2016 04-28
Heavy Shackle Introduction

Heavy-duty shackle is the most widely used connection tool in lifting operations, and is mainly used for connection parts that are often installed and removed in lifting operations. Heavy shackle material: Q235, 45 # steel, 40Cr, stainless steel, etc. Surface treatment: black (baked / painted), galvanized (white / basket / color) Heavy shackle production process: free forging. A simple mold is needed, and the blank is forged by a friction press to deform the blank to produce a heavy-duty shackle. Heavy-duty shackle product quality: The national standards of this product and international standards are strictly enforced in the production of heavy-duty shackles. The standard shall be spot-checked according to its requirements, and the test pieces shall fully comply with the regulations. The heavy shackles shipped from Yunfan Rigging will type "SR",

04-27 2016 04-27
How should the steel rope inspection system be set up?

According to the requirements of the Lifting Operation and Hoisting Equipment Management Regulations (LOLER), all steel wire rope equipment except for hoisting purposes must be thoroughly inspected every six months. The comprehensive inspection cycle stipulated by LOLER is a link in the entire equipment inspection work system, which is only a general requirement. Therefore, it is only applicable to general operating conditions. Regular comprehensive inspections in accordance with this rule often cannot guarantee 100% steel wire ropes Safe use in actual operations. So how to build a scientific and reasonable steel wire rope inspection system? A scientific and reasonable steel wire rope inspection system should be constructed under specific operating conditions. The more demanding the operating environment and the higher the frequency of use, the shorter the interval between two comprehensive inspections. This needs to be

04-21 2016 04-21
Use of tight rigging

The tight rigging is also called a tensioner. As the name suggests, it acts as a tensioner. This is different from other slings and cannot be used for lifting. Tight rigging is usually used with a chain. After locking with a tight rigging, the object will not fall off, which is safe and reliable and protects the object from damage. Tight rigging is used to tighten and strengthen the equipment, which plays a fixed role in the transportation, movement, shipment or storage of goods. The operation of the tight rigging is simple, and the efficiency is increased by more than ten times compared with other tightening methods. Tight rigging can be used for the fastening of goods on trucks, trailers, ships or rails, as well as the binding and fastening of steel, wood and various pipe articles. In addition, the anchor is also suitable for vehicle trailers and rescue applications. Qingdao Yunfan has provided various types of tight rigging for a long time, and we look forward to cooperating with you! (this

04-15 2016 04-15
Suggestions for handling of lifting chain rigging

The lifting chain rigging often breaks or welds during use. The reason may be that the quality of the chain rigging itself is defective or the chain is overloaded to lift and break the chain. In addition, some chain rigging that has no problem with its quality will also break after severe wear. After the lifting of the lifting chain rigging, some customers choose to weld the chain themselves in order to save money. Such errors are absolutely not allowed. The lifting chain rigging is processed through a series of complicated processes, and its rigidity, toughness and various properties meet the national lifting industry standards. And if welding by ourselves, not only the original load capacity of the chain rigging cannot be guaranteed, but also the chain rigging of the self-welded chain rigging changes a series of properties of the chain rigging at the factory, and it is easy to cause breakage again. So remind users, if you encounter lifting

1 2 3 Total records: 48 | Pages: 3 1 2 3   

青岛云帆索具有限公司 Application case Honor certificate Factory equipment Yunfan News 移动网站 Mobile website

官方微信 Official WeChat customer evaluation FAQ contact Yunfan 公众微信号 Public WeChat

七乐彩 欢乐拼三张 皇冠体育app 欢乐拼三张